Struct futures::sync::mpsc::UnboundedSender [−][src]
pub struct UnboundedSender<T>(_);
The transmission end of a channel which is used to send values.
This is created by the unbounded
method.
Methods
impl<T> UnboundedSender<T>
[src]
impl<T> UnboundedSender<T>
pub fn unbounded_send(&self, msg: T) -> Result<(), SendError<T>>
[src]
pub fn unbounded_send(&self, msg: T) -> Result<(), SendError<T>>
Sends the provided message along this channel.
This is an unbounded sender, so this function differs from Sink::send
by ensuring the return type reflects that the channel is always ready to
receive messages.
Trait Implementations
impl<T: Debug> Debug for UnboundedSender<T>
[src]
impl<T: Debug> Debug for UnboundedSender<T>
fn fmt(&self, f: &mut Formatter) -> Result
[src]
fn fmt(&self, f: &mut Formatter) -> Result
Formats the value using the given formatter. Read more
impl<T> Sink for UnboundedSender<T>
[src]
impl<T> Sink for UnboundedSender<T>
type SinkItem = T
The type of value that the sink accepts.
type SinkError = SendError<T>
The type of value produced by the sink when an error occurs.
fn start_send(&mut self, msg: T) -> StartSend<T, SendError<T>>
[src]
fn start_send(&mut self, msg: T) -> StartSend<T, SendError<T>>
Begin the process of sending a value to the sink. Read more
fn poll_complete(&mut self) -> Poll<(), SendError<T>>
[src]
fn poll_complete(&mut self) -> Poll<(), SendError<T>>
Flush all output from this sink, if necessary. Read more
fn close(&mut self) -> Poll<(), SendError<T>>
[src]
fn close(&mut self) -> Poll<(), SendError<T>>
A method to indicate that no more values will ever be pushed into this sink. Read more
fn wait(self) -> Wait<Self> where
Self: Sized,
[src]
fn wait(self) -> Wait<Self> where
Self: Sized,
Creates a new object which will produce a synchronous sink. Read more
fn with<U, F, Fut>(self, f: F) -> With<Self, U, F, Fut> where
F: FnMut(U) -> Fut,
Fut: IntoFuture<Item = Self::SinkItem>,
Fut::Error: From<Self::SinkError>,
Self: Sized,
[src]
fn with<U, F, Fut>(self, f: F) -> With<Self, U, F, Fut> where
F: FnMut(U) -> Fut,
Fut: IntoFuture<Item = Self::SinkItem>,
Fut::Error: From<Self::SinkError>,
Self: Sized,
Composes a function in front of the sink. Read more
fn with_flat_map<U, F, St>(self, f: F) -> WithFlatMap<Self, U, F, St> where
F: FnMut(U) -> St,
St: Stream<Item = Self::SinkItem, Error = Self::SinkError>,
Self: Sized,
[src]
fn with_flat_map<U, F, St>(self, f: F) -> WithFlatMap<Self, U, F, St> where
F: FnMut(U) -> St,
St: Stream<Item = Self::SinkItem, Error = Self::SinkError>,
Self: Sized,
Composes a function in front of the sink. Read more
fn sink_map_err<F, E>(self, f: F) -> SinkMapErr<Self, F> where
F: FnOnce(Self::SinkError) -> E,
Self: Sized,
[src]
fn sink_map_err<F, E>(self, f: F) -> SinkMapErr<Self, F> where
F: FnOnce(Self::SinkError) -> E,
Self: Sized,
Transforms the error returned by the sink.
fn sink_from_err<E: From<Self::SinkError>>(self) -> SinkFromErr<Self, E> where
Self: Sized,
[src]
fn sink_from_err<E: From<Self::SinkError>>(self) -> SinkFromErr<Self, E> where
Self: Sized,
Map this sink's error to any error implementing From
for this sink's Error
, returning a new sink. Read more
fn buffer(self, amt: usize) -> Buffer<Self> where
Self: Sized,
[src]
fn buffer(self, amt: usize) -> Buffer<Self> where
Self: Sized,
Adds a fixed-size buffer to the current sink. Read more
fn fanout<S>(self, other: S) -> Fanout<Self, S> where
Self: Sized,
Self::SinkItem: Clone,
S: Sink<SinkItem = Self::SinkItem, SinkError = Self::SinkError>,
[src]
fn fanout<S>(self, other: S) -> Fanout<Self, S> where
Self: Sized,
Self::SinkItem: Clone,
S: Sink<SinkItem = Self::SinkItem, SinkError = Self::SinkError>,
Fanout items to multiple sinks. Read more
fn flush(self) -> Flush<Self> where
Self: Sized,
[src]
fn flush(self) -> Flush<Self> where
Self: Sized,
A future that completes when the sink has finished processing all pending requests. Read more
fn send(self, item: Self::SinkItem) -> Send<Self> where
Self: Sized,
[src]
fn send(self, item: Self::SinkItem) -> Send<Self> where
Self: Sized,
A future that completes after the given item has been fully processed into the sink, including flushing. Read more
fn send_all<S>(self, stream: S) -> SendAll<Self, S> where
S: Stream<Item = Self::SinkItem>,
Self::SinkError: From<S::Error>,
Self: Sized,
[src]
fn send_all<S>(self, stream: S) -> SendAll<Self, S> where
S: Stream<Item = Self::SinkItem>,
Self::SinkError: From<S::Error>,
Self: Sized,
A future that completes after the given stream has been fully processed into the sink, including flushing. Read more
impl<'a, T> Sink for &'a UnboundedSender<T>
[src]
impl<'a, T> Sink for &'a UnboundedSender<T>
type SinkItem = T
The type of value that the sink accepts.
type SinkError = SendError<T>
The type of value produced by the sink when an error occurs.
fn start_send(&mut self, msg: T) -> StartSend<T, SendError<T>>
[src]
fn start_send(&mut self, msg: T) -> StartSend<T, SendError<T>>
Begin the process of sending a value to the sink. Read more
fn poll_complete(&mut self) -> Poll<(), SendError<T>>
[src]
fn poll_complete(&mut self) -> Poll<(), SendError<T>>
Flush all output from this sink, if necessary. Read more
fn close(&mut self) -> Poll<(), SendError<T>>
[src]
fn close(&mut self) -> Poll<(), SendError<T>>
A method to indicate that no more values will ever be pushed into this sink. Read more
fn wait(self) -> Wait<Self> where
Self: Sized,
[src]
fn wait(self) -> Wait<Self> where
Self: Sized,
Creates a new object which will produce a synchronous sink. Read more
fn with<U, F, Fut>(self, f: F) -> With<Self, U, F, Fut> where
F: FnMut(U) -> Fut,
Fut: IntoFuture<Item = Self::SinkItem>,
Fut::Error: From<Self::SinkError>,
Self: Sized,
[src]
fn with<U, F, Fut>(self, f: F) -> With<Self, U, F, Fut> where
F: FnMut(U) -> Fut,
Fut: IntoFuture<Item = Self::SinkItem>,
Fut::Error: From<Self::SinkError>,
Self: Sized,
Composes a function in front of the sink. Read more
fn with_flat_map<U, F, St>(self, f: F) -> WithFlatMap<Self, U, F, St> where
F: FnMut(U) -> St,
St: Stream<Item = Self::SinkItem, Error = Self::SinkError>,
Self: Sized,
[src]
fn with_flat_map<U, F, St>(self, f: F) -> WithFlatMap<Self, U, F, St> where
F: FnMut(U) -> St,
St: Stream<Item = Self::SinkItem, Error = Self::SinkError>,
Self: Sized,
Composes a function in front of the sink. Read more
fn sink_map_err<F, E>(self, f: F) -> SinkMapErr<Self, F> where
F: FnOnce(Self::SinkError) -> E,
Self: Sized,
[src]
fn sink_map_err<F, E>(self, f: F) -> SinkMapErr<Self, F> where
F: FnOnce(Self::SinkError) -> E,
Self: Sized,
Transforms the error returned by the sink.
fn sink_from_err<E: From<Self::SinkError>>(self) -> SinkFromErr<Self, E> where
Self: Sized,
[src]
fn sink_from_err<E: From<Self::SinkError>>(self) -> SinkFromErr<Self, E> where
Self: Sized,
Map this sink's error to any error implementing From
for this sink's Error
, returning a new sink. Read more
fn buffer(self, amt: usize) -> Buffer<Self> where
Self: Sized,
[src]
fn buffer(self, amt: usize) -> Buffer<Self> where
Self: Sized,
Adds a fixed-size buffer to the current sink. Read more
fn fanout<S>(self, other: S) -> Fanout<Self, S> where
Self: Sized,
Self::SinkItem: Clone,
S: Sink<SinkItem = Self::SinkItem, SinkError = Self::SinkError>,
[src]
fn fanout<S>(self, other: S) -> Fanout<Self, S> where
Self: Sized,
Self::SinkItem: Clone,
S: Sink<SinkItem = Self::SinkItem, SinkError = Self::SinkError>,
Fanout items to multiple sinks. Read more
fn flush(self) -> Flush<Self> where
Self: Sized,
[src]
fn flush(self) -> Flush<Self> where
Self: Sized,
A future that completes when the sink has finished processing all pending requests. Read more
fn send(self, item: Self::SinkItem) -> Send<Self> where
Self: Sized,
[src]
fn send(self, item: Self::SinkItem) -> Send<Self> where
Self: Sized,
A future that completes after the given item has been fully processed into the sink, including flushing. Read more
fn send_all<S>(self, stream: S) -> SendAll<Self, S> where
S: Stream<Item = Self::SinkItem>,
Self::SinkError: From<S::Error>,
Self: Sized,
[src]
fn send_all<S>(self, stream: S) -> SendAll<Self, S> where
S: Stream<Item = Self::SinkItem>,
Self::SinkError: From<S::Error>,
Self: Sized,
A future that completes after the given stream has been fully processed into the sink, including flushing. Read more
impl<T> Clone for UnboundedSender<T>
[src]
impl<T> Clone for UnboundedSender<T>
fn clone(&self) -> UnboundedSender<T>
[src]
fn clone(&self) -> UnboundedSender<T>
Returns a copy of the value. Read more
fn clone_from(&mut self, source: &Self)
1.0.0[src]
fn clone_from(&mut self, source: &Self)
Performs copy-assignment from source
. Read more
Auto Trait Implementations
impl<T> Send for UnboundedSender<T> where
T: Send,
impl<T> Send for UnboundedSender<T> where
T: Send,
impl<T> Sync for UnboundedSender<T> where
T: Send,
impl<T> Sync for UnboundedSender<T> where
T: Send,